info@dayangglass.com +86-755-89715589

5 November 2026

How Does Smart Glass Work?

Smart glass — also called switchable or dynamic glass — changes how much light or how clearly you can see through it, on demand. Instead of blinds or curtains, an electrical signal (or, in some types, heat or light) changes the glass itself. This guide explains the three main technologies in plain terms and where each one fits.

The three main types

PDLC — switch between clear and private

PDLC (Polymer Dispersed Liquid Crystal) is the most common technology for privacy glass. A film of liquid-crystal droplets sits between two glass layers:

  • Power off: the droplets scatter light, so the glass looks a frosted, private white.
  • Power on: a low AC voltage lines them up, so the glass turns clear.

PDLC switches almost instantly (well under a second) and is an on/off privacy product — it controls whether you can see through, not how much heat or glare gets in. It is used for partitions, doors, bathroom and meeting-room glazing, and shopfronts.

SPD — dim the light and glare

SPD (Suspended Particle Device) glass darkens rather than frosts. Tiny particles align under voltage to let light through, and spread out to block it when off, so the glass goes from dark to clear. SPD is good at controlling glare and heat and can be dimmed to any level in between. It is used in skylights, cars, aircraft and premium facades.

Electrochromic — slow tint for facades

Electrochromic glass changes tint through a slow chemical reaction when a small voltage is applied, taking minutes to shift from clear to a blue-grey tint. It uses very little power (only to change state) and is aimed at solar control on building facades, reducing cooling load and glare over the course of a day.

How to choose

If you want…Use
Instant privacy (clear ↔ opaque)PDLC
Glare and heat control, dimmableSPD
Whole-facade solar controlElectrochromic

For most privacy applications — offices, clinics, homes, hospitality — PDLC is the practical, cost-effective choice, and it can be laminated into safety glass or an insulated unit.

Common questions

  • Does smart glass need constant power? PDLC and SPD draw power to stay in their powered state (usually clear); switch it off and PDLC returns to private. Electrochromic only uses power to change state.
  • Is it safe as glazing? When the film is laminated between glass plies, the panel behaves as laminated safety glass.
  • Can it go outside? Yes, if it is a laminated panel, ideally built into an insulated glass unit; thin retrofit films are generally interior products.
  • What voltage? Typically a low AC voltage through a small driver/transformer supplied with the glass.

Smart glass from Dayang

Dayang manufactures PDLC switchable glass as finished laminated panels, and can build it into insulated units for windows and facades. See our switchable glass page, or send your project sizes and drawings through the contact page for a quote.

Interested in our glass products?

Contact our export team for technical advice, samples and a competitive quotation.

Get a Quote